Skip to content

Intro

Introduction

We call data sources those devices (e.g. sensors, PLCs) that make available to AL300 some variables whose values can be read by AL300. Some data sources also support writing values (e.g. setpoints, thresholds, commands).

AL300 supports two modes of configuration of the communication with these devices:

  1. generic driver: allows you to use a protocol freely, thus supporting any device from any manufacturer
  2. plug&play driver: allows you to acquire specific devices with minimal configuration. AL300 already knows their characteristics and the available variables

Generic drivers

The supported protocols are:

Plug&play drivers

We add several devices every month and this list is always growing. Among the currently supported devices we have:

  • Algodue UEM1P5 RS485: Three-phase energy meter for the energy measurement in industrial and civilian application
  • Algodue UEM1P5 TCP: Three-phase energy meter for the energy measurement in industrial and civilian application
  • Algodue UEM40 RS485: Single phase energy meter for the energy measurement in industrial and civilian application
  • Algodue UEM80 RS485: Three-phase energy meter for the energy measurement in industrial and civilian application
  • Algodue UEM80 TCP: Three-phase energy meter for the energy measurement in industrial and civilian application
  • Algodue UPM209 RS485: Power meter for measurement and recording of the electrical parameters
  • Algodue UPM209 TCP: Power meter for measurement and recording of the electrical parameters
  • Algodue UPM309 RS485: Three-phase network analyzer for measuring and storing electrical parameters
  • Algodue UPM309 TCP: Three-phase network analyzer for measuring and storing electrical parameters
  • Ametek Baseline 9100: Gas chromatograph for EtO | COV | BTEX. Uses TCP connection to read live data from 16 channels
  • Caleffi Conteca Easy: Energy meater for HVAC
  • Cemb Cube: Triaxial accelerometer
  • Cemb TD2-HFC: Central unit for two accelerometers with Tacho for speed reading
  • Cemb TDSP&TD2: Central unit for the monitoring of absolute and relative vibrations, compatible with accelerometers, velocimeters and proximity sensors, with optional tacho input for synchronous measurements
  • Comet TX: Ambient temperature, humidity, precision, CO2 sensor
  • EnergyTeam X-Meter Serial: Power meter for measurement and recording of the electrical parameters
  • EnergyTeam X-Meter TCP: Power meter for measurement and recording of the electrical parameters
  • FRER NANO / QUBO: Power meter for measurement and recording of the electrical parameters. Supported models: Q52...(NaNo) / Q72/96 (Qubo) / MCUP0H
  • Gavazzi EM24: Power meter for measurement and recording of the electrical parameters
  • Local I/O: Local I/O module for digital and analog inputs and outputs. It can be used to connect sensors and actuators to the device.
  • Milesight AM102 2-in-1 IAQ Sensor: Provide real-time and basic temperature and humidity data in your indoor air quality (IAQ)
  • Milesight CT101 Current Transformer: A LoRaWAN®-enabled device with an innovative, non-intrusive quick installation. It accurately estimates energy consumption with a sampling rate up to 3.3kHz and calculates cumulative ampere-hours every second
  • Milesight Em300 Temperature and Humidity Sensor: EM300-TH is suitable for indoor and outdoor temperature and humidity monitoring
  • Milesight UC100 Controller IoT: Read up to 32 Modbus RTU devices, serving as a converter from Modbus RS485 to LoRaWAN®. Designed for remote control and data acquisition.
  • Milesight WS101 Smart Button: The Milesight WS101 is a compact, battery-powered LoRaWAN® smart button designed for wireless control, triggering actions, and sending alarms
  • NEON Temperature Sensor: Atex LoRaWAN Temperature Sensor
  • NEON Temperature Transmitter: Atex LoRaWAN Temperature Transmitter to transmit the signal for monitoring purposes by being connected to an industrial thermocouple or RTD.
  • Network ping: Network diagnostics through ICMP ping
  • Overdigit EX04AIO: 4 channels analog input/output module
  • Overdigit EX08AI: 8 channels analog input module
  • Overdigit EX1608DD: 16 digital inputs and 8 digital outputs module
  • RAK10701: LoRaWAN field tester for collecting signal strength and quality data in the field
  • RAK7201 WisNode Button 4K: The Button is suitable for a variety of Smart Home applications: Entertainment system control, Control of Lights, a Snooze Button for your Alarms, or a remote trigger. With long-range wireless connectivity, amazing battery life, and four programmable buttons, there are a ton of applications this device can fit into
  • Schneider iEM-3000: Single or 3-phase DIN rail-mounted energy meters
  • Schneider MicroLogic: MicroLogic trip unit for ComPact NSX, PowerPact H-,J-, and L-frame, ComPact NS, PowerPact P-, and R-frame or MasterPact NT/NW circuit breaker.
  • Schneider PM3250: PM3250 energy meter for DIN rail mounting with backlit LCD display
  • Schneider PM5000: Compact, versatile meters for energy cost and basic network management applications
  • Siemens SITRANS FMT020: Flow meter for liquids and gases with Ethernet/IP connection
  • SMC Air Management: Monitors machine standby conditions (when production stops) and automatically reduces pressure. Reduces unnecessary air consumption.
  • Solis Grid-tied PV Inverter: Solis Grid-tied PV Inverter of all power ranges with Modbus RTU/RS485 connection
  • Telematica MB880-X: External Modbus/RTU, Modbus/TCP converter for Iskra MT880 meters
  • Thytronic NA10: NA10 general protection relay (software version 3.72)
  • Thytronic NA60: NA60 general protection relay (software version 3.91)